Difference between revisions of "00741"
From Ross-Tech Wiki
| (One intermediate revision by one other user not shown) | |||
| Line 21: | Line 21: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * On ALH engine, go into Engine then Measuring Blocks group 006, Field #2 | + | * On 1.9L TDI ALH engine, go into Engine then Measuring Blocks group 006, Field #2 (01-08-006#2) |
| − | * Foot off brake #2 should read 000 | + | ** Foot off brake field #2 should read 000 |
| − | * Slowly press on brake, should then read 011 with both "1" activating at the same time | + | ** Slowly press on brake, should then read 011 with both "1" activating at the same time |
| − | * If both "1" do not activate at same time, Brake | + | ** If both "1" do not activate at same time, Brake Light Switch may be defective. |
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 11:36, 4 February 2011
00741 - Brake Pedal Monitoring
Possible Symptoms
- No accelerator pedal response
- Poor engine performance
- Glow Plug light flashing
Possible Causes
- Issue with Brake Light Switch F47
- Issue with Brake Lights
Possible Solutions
- Verify correct brake light bulbs are installed.
- Inspect brake light bulb sockets for damage.
- Test Brake Light Switch F47
Special Notes
- On 1.9L TDI ALH engine, go into Engine then Measuring Blocks group 006, Field #2 (01-08-006#2)
- Foot off brake field #2 should read 000
- Slowly press on brake, should then read 011 with both "1" activating at the same time
- If both "1" do not activate at same time, Brake Light Switch may be defective.