00741: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
-
1.
00741 - Brake Pedal Monitoring
- 1.1.1 Possible Symptoms
- 1.2.1 Possible Causes
- 1.3.1 Possible Solutions
- 1.4.1 Special Notes
No edit summary |
|||
| Line 21: | Line 21: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
* On ALH engine, go into Engine then Measuring Blocks group 006, Field #2 (01-08-006#2) | * On 1.9L TDI ALH engine, go into Engine then Measuring Blocks group 006, Field #2 (01-08-006#2) | ||
* Foot off brake #2 should read 000 | ** Foot off brake field #2 should read 000 | ||
* Slowly press on brake, should then read 011 with both "1" activating at the same time | ** Slowly press on brake, should then read 011 with both "1" activating at the same time | ||
* If both "1" do not activate at same time, Brake | ** If both "1" do not activate at same time, Brake Light Switch may be defective. | ||
__FORCETOC__ | __FORCETOC__ | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 16:36, 4 February 2011
00741 - Brake Pedal Monitoring
Possible Symptoms
- No accelerator pedal response
- Poor engine performance
- Glow Plug light flashing
Possible Causes
- Issue with Brake Light Switch F47
- Issue with Brake Lights
Possible Solutions
- Verify correct brake light bulbs are installed.
- Inspect brake light bulb sockets for damage.
- Test Brake Light Switch F47
Special Notes
- On 1.9L TDI ALH engine, go into Engine then Measuring Blocks group 006, Field #2 (01-08-006#2)
- Foot off brake field #2 should read 000
- Slowly press on brake, should then read 011 with both "1" activating at the same time
- If both "1" do not activate at same time, Brake Light Switch may be defective.