16891/P0507/001287: Difference between revisions
From Ross-Tech Wiki
Table Of Contents
RtWiKiSyS0p (talk | contribs) New page: __FORCETOC__ == 16891/P0507/001287 - Idle Control System RPM: Higher than Expected. == ==== Possible Symptoms ==== * Malfunction Indicator Lamp (MIL) active ==== Possible Causes ==== *... |
No edit summary |
||
Line 10: | Line 10: | ||
* Throttle Valve Control Module (J338) dirty/faulty | * Throttle Valve Control Module (J338) dirty/faulty | ||
* Wiring/Connector(s) from/to Throttle Valve Control Module (J338) | * Wiring/Connector(s) from/to Throttle Valve Control Module (J338) | ||
* Vacuum Leak | |||
==== Possible Solutions ==== | ==== Possible Solutions ==== | ||
Line 15: | Line 16: | ||
* Check Throttle Valve Control Module (J338) | * Check Throttle Valve Control Module (J338) | ||
* Check Wiring/Connector(s) from/to Throttle Valve Control Module (J338) | * Check Wiring/Connector(s) from/to Throttle Valve Control Module (J338) | ||
* Check Intake system for Leaks | |||
==== Special Notes ==== | |||
* When found in the NAR 2.0T (BPY) check RVUTB: 01-09-03 or 2018919 for updated Crankcase Breather Valve | |||
[[Category:Fault Codes]] | [[Category:Fault Codes]] |
Revision as of 22:46, 22 April 2010
16891/P0507/001287 - Idle Control System RPM: Higher than Expected.
Possible Symptoms
- Malfunction Indicator Lamp (MIL) active
Possible Causes
- Throttle Valve Control Module (J338) dirty/faulty
- Wiring/Connector(s) from/to Throttle Valve Control Module (J338)
- Vacuum Leak
Possible Solutions
- Check Throttle Valve Control Module (J338)
- Check Wiring/Connector(s) from/to Throttle Valve Control Module (J338)
- Check Intake system for Leaks
Special Notes
- When found in the NAR 2.0T (BPY) check RVUTB: 01-09-03 or 2018919 for updated Crankcase Breather Valve