Difference between revisions of "01325"
From Ross-Tech Wiki
Line 24: | Line 24: | ||
* When found in [[VW Golf/Jetta/Bora (1K/5M)]] and similar Golf based models: | * When found in [[VW Golf/Jetta/Bora (1K/5M)]] and similar Golf based models: | ||
** With '''Direct TPMS''', using the diagnostic capable [[VW Golf (1K) Tire Pressure Monitoring|Tire Pressure Monitoring]] module, check Coding and perform Adaptation. | ** With '''Direct TPMS''', using the diagnostic capable [[VW Golf (1K) Tire Pressure Monitoring|Tire Pressure Monitoring]] module, check Coding and perform Adaptation. | ||
+ | *** 2010 Model year Golf and GTI vehicles in the US Market may require a flash update to prevent reoccurring corrupted specified pressures after low voltage conditions. Contact your local VW dealer with the VIN to see if any service actions/recalls are open. | ||
** With '''Indirect TPMS''' (without diagnostic capable address 65) check tire pressure, use TPMS reset button or MFA menu and test drive per the description in the owner's/repair manual. | ** With '''Indirect TPMS''' (without diagnostic capable address 65) check tire pressure, use TPMS reset button or MFA menu and test drive per the description in the owner's/repair manual. | ||
*** Some vehicles may reset the lights before the test drive and other models may not. If in doubt, test drive the vehicle after the reset procedure followed by running another Auto-Scan to see which (if any) faults reoccurred. | *** Some vehicles may reset the lights before the test drive and other models may not. If in doubt, test drive the vehicle after the reset procedure followed by running another Auto-Scan to see which (if any) faults reoccurred. |
Revision as of 15:58, 10 June 2015
01325 - Control Module for Tire Pressure Monitoring (J502)
01325 - Control Module for Tire Pressure Monitoring (J502) : No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator (MIL) / Tire Pressure Warning Lamp active
- Tire Pressure Monitoring not operating
Possible Causes
- Tire Pressure Monitoring (J502) incorrectly coded
- Low battery voltage can cause this fault code
Possible Solutions
- Check Tire Pressure Monitoring (J502) Coding
- Check the battery and test drive the vehicle
Special Notes
- When found in VW Passat (3C): Tire Pressure Monitoring, check Coding and perform Adaptation.
- When found in VW Golf/Jetta/Bora (1K/5M) and similar Golf based models:
- With Direct TPMS, using the diagnostic capable Tire Pressure Monitoring module, check Coding and perform Adaptation.
- 2010 Model year Golf and GTI vehicles in the US Market may require a flash update to prevent reoccurring corrupted specified pressures after low voltage conditions. Contact your local VW dealer with the VIN to see if any service actions/recalls are open.
- With Indirect TPMS (without diagnostic capable address 65) check tire pressure, use TPMS reset button or MFA menu and test drive per the description in the owner's/repair manual.
- Some vehicles may reset the lights before the test drive and other models may not. If in doubt, test drive the vehicle after the reset procedure followed by running another Auto-Scan to see which (if any) faults reoccurred.
- With Direct TPMS, using the diagnostic capable Tire Pressure Monitoring module, check Coding and perform Adaptation.
- The Official Factory Repair Information, vehicle owner's manual and labels on the chassis may provide additional information.