Difference between revisions of "Audi A5 (8T) Brake Electronics (Bosch 8.0)"
From Ross-Tech Wiki
(Created page with "== Coding == '''Coding a Bosch 8.0 Control Module from scratch is normally done via Software Version Management (SVM).''' If the old Control Module is still accessible read/co...") |
|||
| Line 1: | Line 1: | ||
| + | __FORCETOC__ | ||
== Coding == | == Coding == | ||
'''Coding a Bosch 8.0 Control Module from scratch is normally done via Software Version Management (SVM).''' If the old Control Module is still accessible read/copy it's Coding to the new Module. If that is not possible we may be able to help Registered VCDS users. Registered users encountering difficulty can join and post the inquiry in our [http://forums.ross-tech.com/ forum] -or- contact us directly via [mailto:Support@Ross-Tech.com email] with the complete Auto-Scan.<br> | '''Coding a Bosch 8.0 Control Module from scratch is normally done via Software Version Management (SVM).''' If the old Control Module is still accessible read/copy it's Coding to the new Module. If that is not possible we may be able to help Registered VCDS users. Registered users encountering difficulty can join and post the inquiry in our [http://forums.ross-tech.com/ forum] -or- contact us directly via [mailto:Support@Ross-Tech.com email] with the complete Auto-Scan.<br> | ||
Revision as of 09:44, 5 May 2015
Coding
Coding a Bosch 8.0 Control Module from scratch is normally done via Software Version Management (SVM). If the old Control Module is still accessible read/copy it's Coding to the new Module. If that is not possible we may be able to help Registered VCDS users. Registered users encountering difficulty can join and post the inquiry in our forum -or- contact us directly via email with the complete Auto-Scan.
Note: A Security Access Code is required prior to Coding. The code will appear in a pop-up balloon when connected to the 03-ABS Brake control module under the [Security Access-16] function.
Basic Setting
Sensor for Steering Angle (G85)
The Steering Angle Sensor (G85) Calibration is performed in address [16] - Steering Wheel Electronics.