VW Passat (3C) Tire Pressure Monitoring: Difference between revisions

Revision as of 19:19, 19 January 2011

Rest of World (RoW):
- 0161211 = Factory
- 0161210 = Service (for manual input of specified pressure)

North America (NAR):
- 0100101 = Factory
- 0100100 = Service (for manual input of specified pressure)

Note: When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterwards to their specified Values.

Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1.

Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled.

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

@@ Line 22: / Line 22: @@
 === Channel 002: Wheel Set ===
 Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1.
-* Wheel set 2 would normally be winter or seasonal use wheels.
+* Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled.
 === Channel 005: Specified Tire Pressure at Full Load (Front Axle) ===