Difference between revisions of "5-Speed Automatic Transmission (09A)"

From Ross-Tech Wiki
Line 2: Line 2:
  
 
'''Information'''<br>
 
'''Information'''<br>
The 09A and 09B transmissions are built on the same version of the 5-speed automatic transmission manufactured by Jatco. <br>
+
The 09A and 09B transmissions are built on the same version of the 5-speed automatic transmission manufactured by Jatco (JF506E). <br>
  
 
'''General Information''' about this transmission is not yet available in a specific Wikipedia entry at this time but this [http://en.wikipedia.org/wiki/List_of_Jatco_transmissions  List of Jatco transmissions] may be helpful. Additional information can be found in the [http://store.ross-tech.com/shop/cat/BCD.html Official Factory Repair Manual] and sources such as [http://www.bentleypublishers.com/volkswagen/technical-training/vw-5-speed-automatic-trans-ssp.html Bentley Publisher's SSP (Self-Study Program)] .<br>
 
'''General Information''' about this transmission is not yet available in a specific Wikipedia entry at this time but this [http://en.wikipedia.org/wiki/List_of_Jatco_transmissions  List of Jatco transmissions] may be helpful. Additional information can be found in the [http://store.ross-tech.com/shop/cat/BCD.html Official Factory Repair Manual] and sources such as [http://www.bentleypublishers.com/volkswagen/technical-training/vw-5-speed-automatic-trans-ssp.html Bentley Publisher's SSP (Self-Study Program)] .<br>

Revision as of 11:40, 10 August 2011


Information
The 09A and 09B transmissions are built on the same version of the 5-speed automatic transmission manufactured by Jatco (JF506E).

General Information about this transmission is not yet available in a specific Wikipedia entry at this time but this List of Jatco transmissions may be helpful. Additional information can be found in the Official Factory Repair Manual and sources such as Bentley Publisher's SSP (Self-Study Program) .


Coding

This module does not support coding!

Basic Setting

Kick-Down Adjustment

The 09A Auto Transmission does NOT support a Basic Settings operation for the Kick-Down Adjustment.

  • The 09A transmission is commonly found in vehicles using the Drive-by-Wire (DBW) throttle systems. In most cases the ECM (Engine Control Module) should support a Kick-Down Basic Settings as described here: Automatic Transmission Basic Settings.