Difference between revisions of "01325"
From Ross-Tech Wiki
| Line 22: | Line 22: | ||
* When found in [[VW Golf/Jetta/Bora (1K/5M)]]: | * When found in [[VW Golf/Jetta/Bora (1K/5M)]]: | ||
| − | ** With Direct TPMS, using the diagnostic capable [[VW Golf (1K) Tire Pressure Monitoring|Tire Pressure Monitoring]] module, check Coding and perform Adaptation. | + | ** With '''Direct TPMS''', using the diagnostic capable [[VW Golf (1K) Tire Pressure Monitoring|Tire Pressure Monitoring]] module, check Coding and perform Adaptation. |
| − | ** With Indirect TPMS (without diagnostic capable address 65) check tire pressure, use TPMS reset button or MFA menu and test drive per the description in the owner's/repair manual. | + | ** With '''Indirect TPMS''' (without diagnostic capable address 65) check tire pressure, use TPMS reset button or MFA menu and test drive per the description in the owner's/repair manual. |
| + | *** Some vehicles may reset the lights before the test drive and other models may not. If in doubt, test drive the vehicle after the reset procedure followed by running another Auto-Scan to see which (if any) faults reoccurred. | ||
* When found in [[VW Passat (3C)]]: [[VW Passat (3C) Tire Pressure Monitoring|Tire Pressure Monitoring]], check Coding and perform Adaptation. | * When found in [[VW Passat (3C)]]: [[VW Passat (3C) Tire Pressure Monitoring|Tire Pressure Monitoring]], check Coding and perform Adaptation. | ||
* The vehicle owner's manual and labels on the chassis may provide additional information. | * The vehicle owner's manual and labels on the chassis may provide additional information. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Revision as of 14:57, 23 July 2014
01325 - Control Module for Tire Pressure Monitoring (J502)
01325 - Control Module for Tire Pressure Monitoring (J502) : No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Malfunction Indicator (MIL) / Tire Pressure Warning Lamp active
- Tire Pressure Monitoring not operating
Possible Causes
- Tire Pressure Monitoring (J502) incorrectly coded
- Low battery voltage can cause this fault code
Possible Solutions
- Check Tire Pressure Monitoring (J502) Coding
- Check the battery and test drive the vehicle
Special Notes
- When found in VW Golf/Jetta/Bora (1K/5M):
- With Direct TPMS, using the diagnostic capable Tire Pressure Monitoring module, check Coding and perform Adaptation.
- With Indirect TPMS (without diagnostic capable address 65) check tire pressure, use TPMS reset button or MFA menu and test drive per the description in the owner's/repair manual.
- Some vehicles may reset the lights before the test drive and other models may not. If in doubt, test drive the vehicle after the reset procedure followed by running another Auto-Scan to see which (if any) faults reoccurred.
- When found in VW Passat (3C): Tire Pressure Monitoring, check Coding and perform Adaptation.
- The vehicle owner's manual and labels on the chassis may provide additional information.