02511
From Ross-Tech Wiki
02511 - Control Module for Seat Occupied Recognition (J706)
02511 - Control Module for Seat Occupied Recognition (J706): No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Function Limitation
- Airbag Warning Light active
Possible Causes
- Basic Setting Not Performed
Possible Solutions
- Perform Basic Setting
Special Notes
- When found in Audi A3 (8P): Airbag 9.41, perform Basic Setting.
- When found in Audi A4 (8E): Airbag 9.41, perform Basic Setting.
- When found in Audi A6 (4F): Airbag, perform Basic Setting.
- When found in Audi A8 (4E): Airbag, perform Basic Setting.
- When found in Audi Q7 (4L): Airbag, perform Basic Setting.
- When found in VW Golf/Jetta/Bora V (1K/5M): Airbag, perform Basic Setting.
- When found in VW New Beetle/Cabriolet (1C/1Y/9C): Airbag, perform Basic Setting.
- When found in VW Passat (3C): Airbag, perform Basic Setting.
- When found in VW Phaeton (3D): Airbag, perform Basic Setting.
- When found in VW Touareg (7L): Airbag, perform Basic Setting.
02511 - Control Module for Seat Occupied Recognition (J706): Defective
Possible Symptoms
- Function Limitation
- Airbag Warning Light active
Possible Causes
- Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706) faulty
- Control Module for Seat Occupied Recognition (J706) faulty
Possible Solutions
- Check Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706)
- Check Measuring Value Blocks (MVB) for Seat Occupation Pressure Sensor (G452)
- Check/Replace Control Module for Seat Occupied Recognition (J706)
Special Notes
- When 02511 - Control Module for Seat Occupied Recognition (J706) 014 - Defective is stored in the North American Region (NAR):
- 2004 -> 2008 New Beetle and New Beetle Convertible (1C/1Y)
- 2005 -> 2008 Jetta (1K)
- 2006 -> 2008 Passat and Passat Wagon (3C)
- 2007 -> 2008 Eos, Gti, Rabbit, and R32 (1K)
Please see TSB # 01-08-07 or 2010347. This TSB covers the dealer updating of the PODS module and should be checked or completed prior to replacing the module.
02511 - Control Module for Seat Occupied Recognition (J706): Implausible Signal
Possible Symptoms
- Function Limitation
- Airbag Warning Light active
Possible Causes
- Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706) faulty
- Control Module for Seat Occupied Recognition (J706) faulty
Possible Solutions
- Check Wiring/Connector(s) from/to Control Module for Seat Occupied Recognition (J706)
- Check Measuring Value Blocks (MVB) for Seat Occupation Pressure Sensor (G452)
- Check/Replace Control Module for Seat Occupied Recognition (J706)