VW Passat (3C) Tire Pressure Monitoring

From Ross-Tech Wiki
Revision as of 23:28, 24 January 2011 by Dana (talk | contribs)

Coding

  • Rest of World (RoW):
    • 0161211 = Factory
    • 0161210 = Service (for manual input of specified pressure)
  • North America (NAR):
    • 0100101 = Factory
    • 0100100 = Service (for manual input of specified pressure)

Note: When Replacing/Recoding a Control Module use the Service Coding and alter the Adaptation Channels afterward to their specified Values.

The 2010 NAR (North American Region) vehicles equipped with the (BCM) 09-Cent. Elect. module have a different coding chart. These models include the Jetta, Golf, Tiguan and Eos and registered users can contact us directly for coding assistance.

Security Access

  • 01503 - General Adaptation "Enabling"


Adaptation

Channel 002: Wheel Set

Wheel Set #1 and Wheel Set #2 may be altered without the Security Access. This channel default is 1.

  • Wheel set 2 would normally be winter or seasonal use wheels. Measuring Block 25 will show which "Reifen-Satz" is enabled.

Channel 005: Specified Tire Pressure at Full Load (Front Axle)

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

Channel 006: Specified Tire Pressure at Partial Load (Front Axle)

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

Channel 007: Specified Tire Pressure at Full Load (Rear Axle)

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

Channel 008: Specified Tire Pressure at Partial Load (Rear Axle)

The specified tire pressure is being entered without a comma. So 2.4 bar is entered as 24.

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=VW_Passat_(3C)_Tire_Pressure_Monitoring&oldid=5254"