00297

From Ross-Tech Wiki
Revision as of 10:32, 4 January 2013 by Dana (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

00297 - Gearbox Speed Sensor (G38)

00297 - Gearbox Speed Sensor (G38): No Signal

Possible Causes

  • Wiring/Connectors faulty
    • Water damage at connector
  • Transmission Vehicle Speed Sensor (G38) faulty

Possible Solutions

  • Check Wiring/Connectors
  • Check Transmission Vehicle Speed Sensor (G38)
    • See Measuring Value Blocks (MVB)

Special Notes

  • When found in the 4-Speed Automatic Transmission (01M) transmission:
    • Check for any applicable TSBs for overlay wiring harnesses as mentioned on the 01M page.
    • The terminal connectors for the G38 and G68 are the same and can be mixed up. This can give an "Implausible Signal". Verify sensors have the correct connectors using the wiring diagram and TSBs mentioned on the 01M page.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=00297&oldid=6962"