02546
From Ross-Tech Wiki
02546 - Steering Limit Stop: No or Incorrect Basic Setting / Adaptation
Possible Symptoms
- Steering Assist OFF
Possible Causes
- No or Incorrect Basic Setting / Adaptation
Possible Solutions
- Perform Steering Limit Stop Adaptation
- Make sure the Ignition is ON and the Engine is Running.
- Center Steering Wheel (±10°) and hold it centered for about 5 Seconds.
- Turn Steering Wheel completely to the Left and hold there for about 10 Seconds.
- Turn Steering Wheel completely to the Right and hold there for about 10 Seconds.
- Center Steering Wheel (±10°).
- Switch Engine and Ignition OFF.
- Switch Ignition ON.
- Wait about 5 Seconds.
- Steering Assist Warning Lamp should turn OFF (If it doesn't, perform a short Test Drive).
- The Steering Limit Stop Adaptation page contains several notes if the procedure is not successful.