02546

From Ross-Tech Wiki
Revision as of 08:23, 24 June 2015 by Dana (talk | contribs)

02546 - Steering Limit Stop: No or Incorrect Basic Setting / Adaptation

Possible Symptoms

  • Steering Assist OFF

Possible Causes

  • No or Incorrect Basic Setting / Adaptation

Possible Solutions

  • Perform Steering Limit Stop Adaptation
    • Make sure the Ignition is ON and the Engine is Running.
    • Center Steering Wheel (±10°) and hold it centered for about 5 Seconds.
    • Turn Steering Wheel completely to the Left and hold there for about 10 Seconds.
    • Turn Steering Wheel completely to the Right and hold there for about 10 Seconds.
    • Center Steering Wheel (±10°).
    • Switch Engine and Ignition OFF.
    • Switch Ignition ON.
    • Wait about 5 Seconds.
    • Steering Assist Warning Lamp should turn OFF (If it doesn't, perform a short Test Drive).