02432

From Ross-Tech Wiki
Revision as of 16:28, 28 March 2011 by Dana (talk | contribs)

02432 - Supply Voltage for Left Parking Brake Motor (V282)

02432 - Supply Voltage for Left Parking Brake Motor (V282): Electrical Fault in Circuit

02432 - Supply Voltage for Left Parking Brake Motor (V282): Open Circuit

Possible Symptoms

  • Parking Brake Warning Light active/flashing

Possible Causes

  • Wiring/Connectors from/to Left Parking Brake Motor (V282) faulty
  • Left Parking Brake Motor (V282) Power Supply faulty
  • Left Parking Brake Motor/Caliper (V282) faulty

Possible Solutions

  • Check Wiring/Connectors from/to Left Parking Brake Motor (V282)
  • Check Left Parking Brake Motor and (V282) Power Supply
  • Perform Terminal 30 Reset
    • Remove Fuse(s) for a short Time.

Special Notes

  • Make sure to cycle the Parking Brake a couple of times between checking for Fault Codes, this will ensure that the Control Module tests the related Components again.
  • When found in VW Passat (3C): Parking Brake Electronics, check TSB 01-07-47 (2015075, NAR only) or TPI 2013530 (RoW) for possible Control Module Software Update which corrects Low Voltage Sensitivity.
  • When checking voltage with this fault code stored, the module may not output power to the motor. Try clearing fault codes and operating the EPB as mentioned above and retesting.
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=02432&oldid=5659"