VW Passat (3B) Immobilizer
Determining Immobilizer Version
The Passat (3B) may use Immobilizer II or Immobilizer III. It is necessary to determine which system the vehicle has installed. Some model year vehicles prior to 2001.5 (B5) do NOT have an Immo system at all.
Immobilizer II
Most 1998-2001 (B5) model year Passats sold in the US/Canada do not have an Immo system at all. There are Rest-of-World Passats with Immo II. Unless you ALREADY have the SKC information for your vehicle and components then you MAY NOT be able to do many of the Immobilizer II functions.
To identify an Immo II vehicle use VCDS and:
[Select]
[17 - Instruments]
Look in the Extra field. You should see a Single 14 digit Immobilizer ID. There should NOT be a 17 digit VIN number in the Extra field:
Extra: VWZ7Z0W0648696
The 14-digit string is the Immo-ID.
[Close Controller, Go Back - 06]
Note; If in doubt, check the Factory Repair Manual for your specific vehicle.
Immobilizer III
Many 2001.5 (Facelift / B5.5) and newer model year vehicles sold in the US/Canada have Immo III and there are other Rest-of-World vehicles with Immo III as well. Unless you ALREADY have the SKC information for your vehicle and components then you WILL NOT be able to do any of the Immobilizer II functions.
To identify an Immo III vehicle use VCDS and:
[Select]
[17 - Instruments]
Look in the Extra field. You should see BOTH a 14 digit Immobilizer ID number and ALSO a 17 digit VIN number in the Extra field like this:
Extra: WVZKB58001H231169 | VWZ7Z0W0648696
The first 17-digit string is the VIN and the second 14-digit string is the Immo-ID.
[Close Controller, Go Back - 06]
Note; If in doubt, check the Factory Repair Manual for your specific vehicle.
In some cases, you'll need to check in the Engine in Measuring Block group 081 to see the Immo-ID
Check the Engine Control Unit (ECU) for similar information:
[Select]
[01 - Engine]
[Meas. Blocks - 08]
Select Block 081.
[Go!]
The first 17-digit string is the VIN. The second 14-digit string in the Immo-ID.
[Done, Go Back]
[Close Controller, Go Back - 06]
Replacement
If you do NOT have the SKC/PIN information for your vehicle and components then you will NOT be able to do many of the Immobilizer related repairs listed below.
Engine Control Unit (J220) Replacement
Immobilizer (Instrument Cluster) Replacement
Immobilizer II Immobilizer Swapping (Instrument Cluster)
Immobilizer III Immobilizer Swapping (Instrument Cluster)
Key Matching
Immobilizer II Key Matching (Cluster)
Immobilizer III Key Matching (Cluster)
Remote Matching
Remote control operation is Not part of the Immo system. This function is handled by the Address [35] - Central Locking or the [46] - Comfort System module and it is not necessary to perform matching unless the remote has been replaced. Please see the VW Passat (3B) platform page for details.
Special Notes
- Used keys from another vehicle cannot be matched to vehicles with the Immo III system.
- Used/Existing keys cannot be matched when BOTH the Cluster and ECM are replaced at the same time with the Immo III system.
- When only ONE component, such as the Instrument Cluster alone, has been replaced the original vehicle keys can be matched.
This page can be used to substitute any broken links above: Immobilizer Information