Audi A8 (4E) Brake Electronics
Login
Note #1: After Login has been carried out you need to recode the control module.
Note #2: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #3: Use function Coding-II instead of Login if that button is unavailable.
Note #4: For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).
In the RoW (Rest of World) market PR-codes need to be used. K8L Notchback - long wheelbase (Long Wheel Base) and K8B Notchback (Short Wheel Base)
- 0?xxx: Chassis
- 3 = Audi S8 (Short Wheel Base)
- 5 = Audi A8 (Short Wheel Base)
- 6 = Audi A8 (Long Wheel Base)
- 0x?xx: Brakes
- 1 = 2FNR 42 AL 18" (PR-1LJ/1LK)
- 2 = 2FNR 42 AL 17" (PR-1LL/1LM)
- 4 = FNRG-60 16" (PR-1LG)
- 7 = Brembo M6 AL 19" (PR-1LW)
- 0xx?x: Engine
- 2 = 10 Cyl. Gasoline
- 3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (PR-1LW)
- 5 = 6/8 Cyl. Diesel w/o Brembo M6 AL 19" (PR-1LW)
- 6 = 6 Cyl. Diesel (Long Wheel Base)
- 9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (PR-1LW)
- 0xxx?: Transmission
- 7 = Automatic (09E/09L)
- 9 = Multitronic (01J)
Coding
Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #4: For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).
Note #5: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.
- 000?xxx: Chassis
- 1 = Audi S8 (Short Wheel Base)
- 7 = Audi A8 (Long Wheel Base)
- 8 = Audi A8 (Short Wheel Base)
- 000x?xx: Brakes
- 3 = FNRG-60 16" (PR-1LG)
- 5 = 2FNR 42 AL 17" (PR-1LL/1LM)
- 6 = 2FNR 42 AL 18" (PR-1LJ/1LK)
- 7 = Brembo M6 AL 19" (PR-1LW)
- 000xx?x: Engine
- 2 = 10 Cyl. Gasoline
- 3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (PR-1LW)
- 5 = 6/8 Cyl. Diesel w/o Brembo M6 AL 19" (PR-1LW)
- 6 = 6 Cyl. Diesel (Long Wheel Base)
- 9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (PR-1LW)
- 000xxx?: Transmission
- 7 = Automatic (09E/09L)
- 9 = Multitronic (01J)
Basic Setting
Steering Angle Sensor (G85) Calibration
[Select]
[03 - ABS Brakes]
[Fault Codes - 02]
[Done, Go Back]
Turn steering wheel at least 30 ° left and back straight ahead.
[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]
[Login - 11]
Or [Coding - 11] if Login is not shown
Enter 40168
[Do It!]
[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]
[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]
[Close Controller, Go Back - 06]
Video Link
Bosch 5.3 and 5.7 ABS with ESP, Coding
