18048/P1640/005696

From Ross-Tech Wiki
Revision as of 09:29, 15 July 2019 by Dana (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

18048/P1640/005696 - Internal Control Module: EEPROM Error

Possible Causes

  • Engine Control Module modified (e.g. Chip Tuning)
  • Engine Control Module faulty

Possible Solutions

  • Contact your Tuner ;)
  • Replace Engine Control Module

Special Notes

  • When found in CAN protocol 01-Engine controllers such as the (BHK) 3.6L Vr6 (4L) chassis Q7 with all zero coding try entering valid coding followed by a key cycle and Throttle Body Alignment. This control module allowed 005696 to be cleared after doing so:
Address 01: Engine (BHK)       Labels: 03H-906-032-BLV.clb
   Part No SW: 03H 906 032 DA    HW: 03H 906 032 G
   Component: Q7 3.6-FSI-LEV2     3234
Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=18048/P1640/005696&oldid=8711"