Difference between revisions of "Audi A8 (4E) Brake Electronics"

From Ross-Tech Wiki
 
(13 intermediate revisions by 4 users not shown)
Line 1: Line 1:
__FORCETOC__
 
 
== Login ==
 
== Login ==
  
 
'''''Note #1''': After Login has been carried out you need to recode the control module.''<br>
 
'''''Note #1''': After Login has been carried out you need to recode the control module.''<br>
'''''Note #2''': The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual ([http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png Example])''<br>
+
'''''Note #2''': The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click [[Production Codes (PR-Codes) can be found on the Vehicle Data Label | here to see an Example of a Sticker]].''<br>
 +
'''''Note #3''': Use function Coding-II instead of Login if that button is unavailable.''<br>
 +
'''''Note #4''': For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).''<br>
 +
''In the RoW (Rest of World) market PR-codes need to be used. K8L Notchback - long wheelbase  (Long Wheel Base) and K8B Notchback (Short Wheel Base)''<br>
  
 
*'''0?xxx''': ''Chassis''
 
*'''0?xxx''': ''Chassis''
Line 10: Line 12:
 
** 6 = Audi A8 (Long Wheel Base)
 
** 6 = Audi A8 (Long Wheel Base)
 
*'''0x?xx''': ''Brakes''
 
*'''0x?xx''': ''Brakes''
** 1 = 2FNR 42 AL 18" (PR-1LJ)
+
** 1 = 2FNR 42 AL 18" (PR-1LJ/1LK)
** 2 = 2FNR 42 AL 17" (PR-1LL)
+
** 2 = 2FNR 42 AL 17" (PR-1LL/1LM)
 
** 4 = FNRG-60 16" (PR-1LG)
 
** 4 = FNRG-60 16" (PR-1LG)
 
** 7 = Brembo M6 AL 19" (PR-1LW)
 
** 7 = Brembo M6 AL 19" (PR-1LW)
Line 23: Line 25:
 
** 7 = Automatic (09E/09L)
 
** 7 = Automatic (09E/09L)
 
** 9 = Multitronic (01J)
 
** 9 = Multitronic (01J)
 
  
 
== Coding ==
 
== Coding ==
Line 29: Line 30:
 
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
 
'''''Note #1''': Coding is accepted after a specific login has been carried out.''<br>
 
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
 
'''''Note #2''': After successful coding the steering angle sensor basic setting needs to be carried out.''<br>
'''''Note #3''': The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual ([http://www.ross-tech.net/vag-com/misc-images/PR-Codes.png Example])''<br>
+
'''''Note #3''': The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click [[Production Codes (PR-Codes) can be found on the Vehicle Data Label | here to see an Example of a Sticker]].''<br>
 +
'''''Note #4''': For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).''<br>
 +
'''''Note #5''': In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.''<br>
  
*'''0?xxx''': ''Chassis''
+
*'''000?xxx''': ''Chassis''
 
** 1 = Audi S8 (Short Wheel Base)
 
** 1 = Audi S8 (Short Wheel Base)
 
** 7 = Audi A8 (Long Wheel Base)
 
** 7 = Audi A8 (Long Wheel Base)
 
** 8 = Audi A8 (Short Wheel Base)
 
** 8 = Audi A8 (Short Wheel Base)
*'''0x?xx''': ''Brakes''
+
*'''000x?xx''': ''Brakes''
 
** 3 = FNRG-60 16" (PR-1LG)
 
** 3 = FNRG-60 16" (PR-1LG)
** 5 = 2FNR 42 AL 17" (PR-1LL)
+
** 5 = 2FNR 42 AL 17" (PR-1LL/1LM)
** 6 = 2FNR 42 AL 18" (PR-1LJ)
+
** 6 = 2FNR 42 AL 18" (PR-1LJ/1LK)
 
** 7 = Brembo M6 AL 19" (PR-1LW)
 
** 7 = Brembo M6 AL 19" (PR-1LW)
*'''0xx?x''': ''Engine''
+
*'''000xx?x''': ''Engine''
 
** 2 = 10 Cyl. Gasoline
 
** 2 = 10 Cyl. Gasoline
 
** 3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (PR-1LW)
 
** 3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (PR-1LW)
Line 46: Line 49:
 
** 6 = 6 Cyl. Diesel (Long Wheel Base)
 
** 6 = 6 Cyl. Diesel (Long Wheel Base)
 
** 9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (PR-1LW)
 
** 9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (PR-1LW)
*'''0xxx?''': ''Transmission''
+
*'''000xxx?''': ''Transmission''
 
** 7 = Automatic (09E/09L)
 
** 7 = Automatic (09E/09L)
** 9 = Multitronic (01J)
+
** 9 = Multitronic (01J)<br>
  
  
Line 70: Line 73:
  
 
'''[Login - 11]'''<br>
 
'''[Login - 11]'''<br>
 +
''Or [Coding - 11] if Login is not shown''<br>
 
Enter 40168<br>
 
Enter 40168<br>
 
'''[Do It!]'''<br>
 
'''[Do It!]'''<br>
Line 83: Line 87:
  
 
'''[Close Controller, Go Back - 06]'''<br>
 
'''[Close Controller, Go Back - 06]'''<br>
 +
 +
 +
== Video Link ==
 +
=== Bosch 5.3 and 5.7 ABS with ESP, Coding ===
 +
 +
[[File:Titlescreen.jpg|200px|link=http://www.youtube.com/watch?v=G7YRiVYrLjo]]
 +
 +
http://www.youtube.com/watch?v=G7YRiVYrLjo
 +
__FORCETOC__

Latest revision as of 12:45, 13 December 2018

Login

Note #1: After Login has been carried out you need to recode the control module.
Note #2: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #3: Use function Coding-II instead of Login if that button is unavailable.
Note #4: For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).
In the RoW (Rest of World) market PR-codes need to be used. K8L Notchback - long wheelbase (Long Wheel Base) and K8B Notchback (Short Wheel Base)

  • 0?xxx: Chassis
    • 3 = Audi S8 (Short Wheel Base)
    • 5 = Audi A8 (Short Wheel Base)
    • 6 = Audi A8 (Long Wheel Base)
  • 0x?xx: Brakes
    • 1 = 2FNR 42 AL 18" (PR-1LJ/1LK)
    • 2 = 2FNR 42 AL 17" (PR-1LL/1LM)
    • 4 = FNRG-60 16" (PR-1LG)
    • 7 = Brembo M6 AL 19" (PR-1LW)
  • 0xx?x: Engine
    • 2 = 10 Cyl. Gasoline
    • 3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (PR-1LW)
    • 5 = 6/8 Cyl. Diesel w/o Brembo M6 AL 19" (PR-1LW)
    • 6 = 6 Cyl. Diesel (Long Wheel Base)
    • 9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (PR-1LW)
  • 0xxx?: Transmission
    • 7 = Automatic (09E/09L)
    • 9 = Multitronic (01J)

Coding

Note #1: Coding is accepted after a specific login has been carried out.
Note #2: After successful coding the steering angle sensor basic setting needs to be carried out.
Note #3: The PR codes ( such as 1LJ ) can be found in a sticker near the spare tire well and the matching sticker on the 1st page of the owners manual. Click here to see an Example of a Sticker.
Note #4: For North American Region (NAR) check the fourth Digit of the VIN for the Chassis Type. M stands for Audi A8 (Long Wheel Base), L for Audi A8 (Short Wheel Base) and P for Audi S8 (Short Wheel Base).
Note #5: In some cases, you will need to enter a non-zero WorkShop Code, such as 12345.

  • 000?xxx: Chassis
    • 1 = Audi S8 (Short Wheel Base)
    • 7 = Audi A8 (Long Wheel Base)
    • 8 = Audi A8 (Short Wheel Base)
  • 000x?xx: Brakes
    • 3 = FNRG-60 16" (PR-1LG)
    • 5 = 2FNR 42 AL 17" (PR-1LL/1LM)
    • 6 = 2FNR 42 AL 18" (PR-1LJ/1LK)
    • 7 = Brembo M6 AL 19" (PR-1LW)
  • 000xx?x: Engine
    • 2 = 10 Cyl. Gasoline
    • 3 = 12 Cyl. Gasoline OR 6/8 Cyl. Gasoline/Diesel with Brembo M6 AL 19" (PR-1LW)
    • 5 = 6/8 Cyl. Diesel w/o Brembo M6 AL 19" (PR-1LW)
    • 6 = 6 Cyl. Diesel (Long Wheel Base)
    • 9 = 6/8 Cyl. Gasoline w/o Brembo M6 AL 19" (PR-1LW)
  • 000xxx?: Transmission
    • 7 = Automatic (09E/09L)
    • 9 = Multitronic (01J)


Basic Setting

Steering Angle Sensor (G85) Calibration

[Select]
[03 - ABS Brakes]

[Fault Codes - 02]
[Done, Go Back]

Turn steering wheel at least 30 ° left and back straight ahead.

[Meas. Blocks - 08]
Group 005 Field 1 (Steering Angle Sensor -G85-)
Specification: 0.0 °
Tolerance (when straight): ±5.0 °
[Done, Go Back]

[Login - 11]
Or [Coding - 11] if Login is not shown
Enter 40168
[Do It!]

[Basic Settings - 04]
Group 001
[Go!]
[Done, Go Back]

[Fault Codes - 02]
All fault codes should have disappeared.
[Done, Go Back]

[Close Controller, Go Back - 06]


Video Link

Bosch 5.3 and 5.7 ABS with ESP, Coding

Titlescreen.jpg

http://www.youtube.com/watch?v=G7YRiVYrLjo