Xenon Basic Settings in BCM1/09-Cent. Elect. (J519) controller

From Ross-Tech Wiki
Revision as of 15:25, 4 August 2015 by Dana (talk | contribs) (Created page with "This page is under construction. This page will only apply to vehicles with factory installed Xenon headlights that do NOT use a diagnostic capable 55-Xenon Range control mod...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

This page is under construction. This page will only apply to vehicles with factory installed Xenon headlights that do NOT use a diagnostic capable 55-Xenon Range control module.

As of VCDS Release 15.7.0 it should be possible to perform Basic Settings in address 09-Cent. Elect. so the factory installed Xenon headlights can be adjusted. Registered users can send the vehicle repair history and complete Auto-Scan directly via email -or- join and post that information in our forum.

Retrieved from "http://wiki.ross-tech.com/wiki/index.php?title=Xenon_Basic_Settings_in_BCM1/09-Cent._Elect._(J519)_controller&oldid=7768"