Difference between revisions of "02915"
From Ross-Tech Wiki
(Created page with " __FORCETOC__ == 02915 - Sensor 2 for Trunk/Hatch Closed (G526) == === 02915 - Sensor 2 for Trunk/Hatch Closed (G526): Open or Short to Plus === ==== Possible Symptoms ==== ...") |
|||
| Line 22: | Line 22: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * When found in the [[Audi Q5 (8R) | Audi Q5]] after repairs in the rear of the vehicle verify the G525 and G526 sensors are plugged in. These can be found in the [[Official Factory Repair Information | repair manual]] but the trim surrounding the striker for the rear hatch should contain both switches. | + | * When found in the [[Audi Q5 (8R) | Audi Q5]] or [[Audi Q7 (4L) | Audi Q7]] after repairs in the rear of the vehicle verify the G525 and G526 sensors are plugged in. These can be found in the [[Official Factory Repair Information | repair manual]] but the trim surrounding the striker for the rear hatch should contain both switches. |
** This fault is typically stored in conjunction with [[02914]] after trailer hitch retrofits and rear bumper repairs/removal. | ** This fault is typically stored in conjunction with [[02914]] after trailer hitch retrofits and rear bumper repairs/removal. | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 12:06, 18 January 2013
02915 - Sensor 2 for Trunk/Hatch Closed (G526)
02915 - Sensor 2 for Trunk/Hatch Closed (G526): Open or Short to Plus
Possible Symptoms
- Tailgate open warning active on dash
- Rear tailgate lamps not operating
Possible Causes
- Hatch Closed switch G526 unplugged or faulty
- Power or ground supply issue to Hatch Closed switch G526
Possible Solutions
- Confirm connection issues are not present
- Test/replace Hatch Closed switch G526
Special Notes
- When found in the Audi Q5 or Audi Q7 after repairs in the rear of the vehicle verify the G525 and G526 sensors are plugged in. These can be found in the repair manual but the trim surrounding the striker for the rear hatch should contain both switches.
- This fault is typically stored in conjunction with 02914 after trailer hitch retrofits and rear bumper repairs/removal.