Difference between revisions of "02656"
From Ross-Tech Wiki
RtWiKiSyS0p (talk | contribs) |
|||
| (2 intermediate revisions by one other user not shown) | |||
| Line 17: | Line 17: | ||
==== Special Notes ==== | ==== Special Notes ==== | ||
| − | * When found in [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)| | + | * In case an Output Stage is being replaced, the Subsystem/Slave often cannot be coded directly. Instead recode the Headlight Aim Control Module with the proper/current Coding, this will also code the Subsystems/Slaves. |
| + | * When found in [[Audi A8/S8 (4E)]]: [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)|Headlight Aim Control (Adaptive Light)]], perform [[Audi A8 (4E) Headlight Aim Control (Adaptive Light)#Coding|Coding]]. | ||
| + | * When found in [[VW Passat (3C)]]: [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)|Headlight Aim Control]], perform [[VW Passat (3C) Headlight Aim Control (Xenon with AFS)#Coding|Coding]]. | ||
| + | * When found in BCM1/09-Cent. Elect. (J519) on 8R, 8T and 8K facelifted Audi models without a diagnostic capable 55-Headlight Range control module, complete this Basic Setting operation: [[Xenon Basic Settings in BCM1/09-Cent. Elect. (J519) controller]] | ||
[[Category:Fault Codes]] | [[Category:Fault Codes]] | ||
Latest revision as of 11:50, 22 September 2016
02656 - Power Output Stage for Left Headlight (J667); Not Coded
Possible Symptoms
- Malfunction Indicator Light (MIL) active
Possible Causes
- Control Module or if Subsystem, Master not coded
Possible Solutions
- Check Control Module Coding
- Cross Reference Control Module Coding with related Control Modules (e.g. for Country or Powertrain Settings)
Special Notes
- In case an Output Stage is being replaced, the Subsystem/Slave often cannot be coded directly. Instead recode the Headlight Aim Control Module with the proper/current Coding, this will also code the Subsystems/Slaves.
- When found in Audi A8/S8 (4E): Headlight Aim Control (Adaptive Light), perform Coding.
- When found in VW Passat (3C): Headlight Aim Control, perform Coding.
- When found in BCM1/09-Cent. Elect. (J519) on 8R, 8T and 8K facelifted Audi models without a diagnostic capable 55-Headlight Range control module, complete this Basic Setting operation: Xenon Basic Settings in BCM1/09-Cent. Elect. (J519) controller