Difference between revisions of "Audi A4/S4/RS4 (8K)"
| Line 28: | Line 28: | ||
=== [03] - [[Audi A5 (8T) Brake Electronics (Bosch 8.0)|Brake Electronics]] === | === [03] - [[Audi A5 (8T) Brake Electronics (Bosch 8.0)|Brake Electronics]] === | ||
Note: ''The Steering Angle Sensor (G85) Calibration is done in address [16] - Steering Wheel Electronics'' | Note: ''The Steering Angle Sensor (G85) Calibration is done in address [16] - Steering Wheel Electronics'' | ||
| − | === [05] - Access/Start Authorization === | + | === [05] - [[MLB based Acc/Start Auth (J393) BCM2|Access/Start Authorization]] === |
=== [06] - Seat Adjustment (Passenger) === | === [06] - Seat Adjustment (Passenger) === | ||
=== [07] - Control Head Front === | === [07] - Control Head Front === | ||
Revision as of 12:01, 30 June 2020
| Audi A4/S4/RS4 (8K/FL) | |
|---|---|
| |
| Source: Ross-Tech, LLC | |
| Information | |
| Manufacturer: | Audi AG |
| Chassis Code: | 8K/FL |
| Platform: | B8 |
| Model Years: | from 2008 |
| Model Years (US): | from 2009 |
| Predecessor: | (8E/8H) |
| Successor: | None |
| Interface Hardware | |
| HEX-V2, HEX-NET, HEX+CAN | |
| DLC Location | |
|
The DLC is located in the Driver Footwell near Hood Latch. | |
General Information about this Model can be found in the Wikipedia entry.
We have small list of Common Modifications & Tweaks for the B8 (A4/S4/A5/S5/Q5).
[01] - Engine Electronics
Gasoline Engines
Diesel Engines
[02] - Transmission Electronics
[03] - Brake Electronics
Note: The Steering Angle Sensor (G85) Calibration is done in address [16] - Steering Wheel Electronics
[05] - Access/Start Authorization
[06] - Seat Adjustment (Passenger)
[07] - Control Head Front
- Control Head Front (Low)
- Coding
- Adaptation
- Label File (8T0-035-7xx-07-L.LBL)
- Control Head Front (High)
- Coding
- Adaptation
- Label File (8T0-035-7xx-07-H.LBL)
[08] - Heating/Air Conditioning
[09] - Central Electronics
E?ID=265022
[0E] - Media Player I
[0F] - Radio (Digital)
[14] - Suspension Electronics
[15] - Airbag
Note:Replacement of the Airbag control module may result in Component Protection DTCs such as U1101 and U1100. Component Protection can only be learned/disabled using the Factory Tool in Combination with an online Connection.
[16] - Steering Wheel Electronics
- Coding
- Security Access
- Basic Setting
- Label File (8K0-953-568.LBL)
[17] - Instrument Cluster
- Coding
- Security Access
- Adaptation
- Label File (8T0-920-xxx-17.CLB)
[19] - CAN-Gateway
Note: This model doesn't use an actual 61-Battery Manager. The battery management control module is a slave/subsystem of the CAN Protocol CAN Gateway which requires the use of Long Adaptation under address 19-CAN-Gateway. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.
[1B] - Active Steering
[36] - Seat Adjustment (Driver)
[42] - Door Electronics Driver
[44] - Steering Assist
[46] - Comfort System
[47] - Sound System
[52] - Door Electronics Passenger
[53] - Parking Brake
- Parking Brake
- Security Access
- Basic Setting
- Label File (8K0-907-801-V1.LBL)
- Component: Component: EPB Audi B8
- Audi A4 (8R/8K) Parking Brake EPB-4
- Label File (8K0-907-801-V2.LBL)
- Component: EPB-4
[55] - Headlight Aim Control
- Headlight Aim Control Audi (8K) / (8T)
- Label File (8K0-907-357.clb)
- Headlight Regulation Basic
- Coding
- Basic Setting
- 4H0-907-357.clb
- Vehicles with factory installed Xenon headlights that do NOT use a diagnostic capable 55-Headlight Range control module use the link under [09] - Central Electronics instead.
[56] - Radio (Analog)
- Radio System (Generation III)
- Coding
- Adaptation
- Label File
- Radio System (MMI Basic)
- Radio System (MMI High)