Difference between revisions of "VW Golf VII (5G/AU)"

From Ross-Tech Wiki
 
(9 intermediate revisions by 2 users not shown)
Line 12: Line 12:
  
 
http://forums.vwvortex.com/showthread.php?7231270
 
http://forums.vwvortex.com/showthread.php?7231270
 +
 +
https://sites.google.com/a/naturalnetworks.ca/vw-golf-mk7-vcds-how-to/
 +
 +
http://forums.vwvortex.com/showthread.php?8687226-VCDS-coding-on-an-Alltrack
  
 
----
 
----
Line 31: Line 35:
 
|Predecessor=[[VW Golf/Golf Plus (5K/52)]]
 
|Predecessor=[[VW Golf/Golf Plus (5K/52)]]
 
|Successor=-
 
|Successor=-
|Interface=[http://www.ross-tech.com/vag-com/hex-usb+can.html HEX+CAN], [http://www.ross-tech.com/vag-com/Micro-CAN.html Micro-CAN]
+
|Interface='''All model years''' [http://www.ross-tech.com/vcds/interfaces.php HEX-V2], [http://www.ross-tech.com/vcds/interfaces.php HEX-NET]
 +
''Limited 2016+ RoW market coverage [http://www.ross-tech.com/vag-com/old-interfaces/discontinued_interfaces.php HEX+CAN], [http://www.ross-tech.com/vag-com/old-interfaces/discontinued_interfaces.php Micro-CAN]''
 
|DLCImage=DLC-VWGolf5G.jpg
 
|DLCImage=DLC-VWGolf5G.jpg
 
|DLC=The DLC is located in the Driver Footwell.
 
|DLC=The DLC is located in the Driver Footwell.
Line 38: Line 43:
 
=== [01] - Engine ===
 
=== [01] - Engine ===
  
=== [02] - Auto Trans ===
+
=== [02] - [[6-Speed Direct Shift Gearbox (DSG/0D9) | Auto Trans]] ===
  
 
=== [03] - [[VW Golf VII (5G/AU) ABS Brakes | ABS Brakes]] ===
 
=== [03] - [[VW Golf VII (5G/AU) ABS Brakes | ABS Brakes]] ===
Line 44: Line 49:
 
**''5Q0-907-379-IPB-V1.clb''
 
**''5Q0-907-379-IPB-V1.clb''
 
**''EV_Brake1UDSContiMK100IPB_VW37''
 
**''EV_Brake1UDSContiMK100IPB_VW37''
 +
* G85 is calibrated in Address 44. See [https://forums.ross-tech.com/showthread.php?4224-MQB-(Mk7-Golf)-Steering-Angle-Sensor-(G85)-Calibration-in-44-Steering-Assist&p=144324&viewfull=1#post144324 this post]
  
 
=== [05] - Access/Start Authorization ===
 
=== [05] - Access/Start Authorization ===
Line 51: Line 57:
 
=== [09] - Cent. Elect. ===
 
=== [09] - Cent. Elect. ===
  
'''Note''': ''Before making ANY changes, you should run and Save a controller channel map of Adaptation in address 09. [[Control_Module_Maps]]
+
'''Note #1''': ''Before making ANY changes, you should run and Save a controller channel map of Adaptation in address 09. [[Control_Module_Maps]]<br>
 +
'''Note #2''': ''Starting around model year 2018 many BCM/CECM modules show all zeros for Coding. In these applications, Coding is neither necessary nor possible. Instead changes are made using Adaptation as discussed here:  https://forums.ross-tech.com/index.php?threads/10616/<br>
 +
'''Note #3''': ''In some of the latest models, you need to open the hood to make changes due to the Diagnostic Firewall that is discussed here:
 +
https://forums.ross-tech.com/index.php?threads/15536/
  
=== [15] - Airbags ===
+
=== [15] - [[AirbagVW20 | Airbags]] ===
  
 
=== [16] - Steering Wheel ===
 
=== [16] - Steering Wheel ===

Latest revision as of 07:30, 2 June 2021

This page will have information about the Golf 7.

These pages have some information on tweaks for the Mk7 Golf platform vehicles:

http://forums.ross-tech.com/showthread.php?512-MQB-Platform-tweaks

http://www.golfgtiforum.co.uk/index.php?topic=260248.0

http://vcds.greg-roberts.com/view-entries

http://forums.vwvortex.com/showthread.php?7013354

http://forums.vwvortex.com/showthread.php?7231270

https://sites.google.com/a/naturalnetworks.ca/vw-golf-mk7-vcds-how-to/

http://forums.vwvortex.com/showthread.php?8687226-VCDS-coding-on-an-Alltrack




Volkswagen Golf VII
VW-Golf-VII.jpg
Source: Ross-Tech, LLC
Information
Manufacturer: Volkswagen AG
Chassis Code: 5G / AU
Platform: VW37X
Model Years: from 2013
Model Years (US): from 2015
Predecessor: VW Golf/Golf Plus (5K/52)
Successor: -
Interface Hardware
All model years HEX-V2, HEX-NET

Limited 2016+ RoW market coverage HEX+CAN, Micro-CAN''

DLC Location
DLC-VWGolf5G.jpg

The DLC is located in the Driver Footwell.


[01] - Engine

[02] - Auto Trans

[03] - ABS Brakes

  • Basic Setting
    • 5Q0-907-379-IPB-V1.clb
    • EV_Brake1UDSContiMK100IPB_VW37
  • G85 is calibrated in Address 44. See this post

[05] - Access/Start Authorization

[08] - Auto HVAC

[09] - Cent. Elect.

Note #1: Before making ANY changes, you should run and Save a controller channel map of Adaptation in address 09. Control_Module_Maps
Note #2: Starting around model year 2018 many BCM/CECM modules show all zeros for Coding. In these applications, Coding is neither necessary nor possible. Instead changes are made using Adaptation as discussed here: https://forums.ross-tech.com/index.php?threads/10616/
Note #3: In some of the latest models, you need to open the hood to make changes due to the Diagnostic Firewall that is discussed here: https://forums.ross-tech.com/index.php?threads/15536/

[15] - Airbags

[16] - Steering Wheel

[17] - Instrument Cluster

[19] - CAN Gateway

[2B] - Steering Column Lock

[42] - Door Elect, Driver

[44] - Steering Assist

[52] - Door Elect, Pass

[55] - Headlight Aim Control

[5F] - Information Electronics

[75] - Telematics

[A9] - Struct. Borne Sound