Difference between revisions of "VW Passat CC (35)"
From Ross-Tech Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 12: | Line 12: | ||
|throughUS= | |throughUS= | ||
|Predecessor=None | |Predecessor=None | ||
| − | |Interface=[http://www.ross-tech.com/vag-com/ | + | |Interface=[http://www.ross-tech.com/vcds/interfaces.php HEX-V2], [http://www.ross-tech.com/vcds/interfaces.php HEX-NET], [http://www.ross-tech.com/vag-com/old-interfaces/discontinued_interfaces.php HEX+CAN], [http://www.ross-tech.com/vag-com/old-interfaces/discontinued_interfaces.php Micro-CAN] |
|DLCImage=DLC-VWPassat3C.jpg | |DLCImage=DLC-VWPassat3C.jpg | ||
|DLC=The DLC is located in the Driver Footwell. | |DLC=The DLC is located in the Driver Footwell. | ||
| Line 142: | Line 142: | ||
=== [53] - Parking Brake === | === [53] - Parking Brake === | ||
| − | ''If you are unsure which Generation is installed, check the Control Module Identification.<br>'''EPB3''' stands for Generation III and '''EPB4''' for Generation IV.'' | + | ''If you are unsure which Generation is installed, check the Control Module Identification.<br>'''EPB3''' stands for Generation III and '''EPB4''' for Generation IV. Dealer parts departments may no longer carry the EPB3 modules because they have been superseded with the newer EPB4 modules. The Coding of the replacement modules will likely not be the same as the Coding in the old module but the Coding charts in VCDS should be applicable.'' |
* [[VW Tiguan (5N) Parking Brake|Parking Brake (Generation III / MY 2008 - 2010)]] | * [[VW Tiguan (5N) Parking Brake|Parking Brake (Generation III / MY 2008 - 2010)]] | ||
Latest revision as of 15:07, 3 January 2017
| VW Passat CC (35) | |
|---|---|
| Information | |
| Manufacturer: | Volkswagen AG |
| Chassis Code: | 35/AN |
| Platform: | VW46X |
| Model Years: | from 2009 |
| Model Years (US): | from 2009 |
| Predecessor: | None |
| Successor: | None |
| Interface Hardware | |
| HEX-V2, HEX-NET, HEX+CAN, Micro-CAN | |
| DLC Location | |
| |
|
The DLC is located in the Driver Footwell. | |
General Information about this Model can be found in the Wikipedia entry.
- We have "small" list of Common Modifications & Tweaks for the VW Golf/Jetta/Bora (1K/5M) that apply to the 2010 and older Passat CC.
- We also have "small" list of Common Modifications & Tweaks which apply to the VW Passat (3C/AN) MY 2011 only and VW Passat CC (35/AN) MY 2011 and up.
[01] - Engine Electronics
Gasoline Engines
- 2.0l FSI (BLR/BLX/BLY/BVX/BVY/BVZ):
- 2.0l TFSI (AXX/BGB/BPJ/BPY/BWA):
- Coding
- Adaptation
- Basic Setting
- Label File (06F-907-115-AXX.LBL)
- 3.2l FSI (AXZ):
- 3.6l FSI (BLV):
- Coding
- Adaptation
- Basic Setting
- Label File (03H-906-032-BLV.LBL)
Diesel Engines
[02] - Transmission Electronics
- 6-Speed Direct Shift Gearbox (DSG/02E):
- Label File (02E-300-0xx.LBL)
- 6-Speed Automatic Transmission (09G):
- Label File (09G-927-750.LBL)
[03] - Brake Electronics
- Brake Electronics (MY 2008 >)
- Coding
- Basic Setting
- Special Procedures
- Replacement
- Label File (3C0-614-109-C4.LBL)
[08] - Heating/Air Conditioning
- Climatic
- Label File (3C8-907-336.LBL)
- Climatronic
- Label File (5K0-907-044.LBL)
[09] - Central Electronics / Body Control Module (BCM)
- Central Electronics (MY 2009 - 2010)
- Coding
- Adaptation
- Label File (3C0-937-049-30-H.LBL - 30 Byte - Highline)
- Label File (3C0-937-049-30-M.LBL - 30 Byte - Midline)
- Body Control Module (MY 2011+)
- As of MY 2011+ the 3AA series Body Control Module (BCM) was introduced. Address 46 -Comfort System should still be accessible and controls the standard comfort controls unlike Golf platform vehicles.
Make sure to have all Doors unlocked, otherwise this Control Module will block Communication with the Scan Tool/VCDS.
- As of MY 2011+ the 3AA series Body Control Module (BCM) was introduced. Address 46 -Comfort System should still be accessible and controls the standard comfort controls unlike Golf platform vehicles.
[0F] - Radio (Digital)
- Sirius
- Label File (8E0-035-593-SIR.LBL)
- XM
- Label File (8E0-035-593-XM.LBL)
[15] - Airbag
- Coding
- Basic Setting
- Special Procedures
- Label File (5N0-959-655.lbl)
[16] - Steering Wheel
[17] - Instrument Cluster
[19] - CAN-Gateway
- Coding
- Label File (3C0-907-530.LBL)
[1C] - Position Sensing
[22] - All-Wheel-Drive
[25] - Immobilizer
This model uses Immobilizer Generation 4D which is integrated as part of the Comfort Control Module (J393).
- Replacement
- Label File (3C0-959-433-25.LBL)
[36] - Seat Adjustment (Driver)
- Label File (3C0-959-760.lbl Label File]
[3D] - Special Functions
[42] - Door Electronics Driver
[44] - Steering Assist
[46] - Comfort System
- Comfort System (MY 2009 - 2010)
- Coding
- Adaptation
- Special Procedures
- Label File (3C0-959-433-46.CLB)
- Comfort System (MY 2011+)
[47] - Sound System
- Label File (3C0-035-456.lbl Label File]
[52] - Door Electronics Passenger
[53] - Parking Brake
If you are unsure which Generation is installed, check the Control Module Identification.
EPB3 stands for Generation III and EPB4 for Generation IV. Dealer parts departments may no longer carry the EPB3 modules because they have been superseded with the newer EPB4 modules. The Coding of the replacement modules will likely not be the same as the Coding in the old module but the Coding charts in VCDS should be applicable.
- Parking Brake (Generation III / MY 2008 - 2010)
- Coding
- Basic Setting
- Label File (5N0-907-801.LBL)
- Parking Brake (Generation IV / MY 2011 >)
- Coding
- Basic Setting
- Label File (3AA-907-801.LBL)
[55] - Headlight Aim Control
- Coding
- Adaptation
- Security Access
- Basic Setting
- Label File (5M0-907-357.LBL)
[56] - Radio (Analog)
[5D] - Operations
- Label File (3C0-035-151.LBL)
[62] - Door Electronics Rear Left
[65] - Tire Pressure Monitoring
[69] - Trailer
[6C] - Back-Up Camera
- Coding
- Security Access
- Special Procedures
- Label File (7L6-907-441.LBL)
[72] - Door Electronics Rear Right
[76] - Parking Aid
[77] - Telephone
- Telephone (Low) (PR-9W8)
- Telephone (Premium) (PR-9ZW)