VW Passat CC (35)

From Ross-Tech Wiki
Revision as of 15:54, 1 April 2016 by Dana (talk | contribs)


VW Passat CC (35)
Information
Manufacturer: Volkswagen AG
Chassis Code: 35/AN
Platform: VW46X
Model Years: from 2009
Model Years (US): from 2009
Predecessor: None
Successor: None
Interface Hardware
HEX+CAN, Micro-CAN
DLC Location
DLC-VWPassat3C.jpg

The DLC is located in the Driver Footwell.


General Information about this Model can be found in the Wikipedia entry.



[01] - Engine Electronics

Gasoline Engines

Diesel Engines

[02] - Transmission Electronics

[03] - Brake Electronics

[08] - Heating/Air Conditioning

[09] - Central Electronics / Body Control Module (BCM)

  • Central Electronics (MY 2009 - 2010)
    • Coding
    • Adaptation
    • Label File (3C0-937-049-30-H.LBL - 30 Byte - Highline)
    • Label File (3C0-937-049-30-M.LBL - 30 Byte - Midline)
  • Body Control Module (MY 2011+)
    • As of MY 2011+ the 3AA series Body Control Module (BCM) was introduced. Address 46 -Comfort System should still be accessible and controls the standard comfort controls unlike Golf platform vehicles.
      Make sure to have all Doors unlocked, otherwise this Control Module will block Communication with the Scan Tool/VCDS.

[0F] - Radio (Digital)

  • Sirius
    • Label File (8E0-035-593-SIR.LBL)
  • XM
    • Label File (8E0-035-593-XM.LBL)

[15] - Airbag

[16] - Steering Wheel

[17] - Instrument Cluster

[19] - CAN-Gateway

  • Coding
  • Label File (3C0-907-530.LBL)

[1C] - Position Sensing

[22] - All-Wheel-Drive

[25] - Immobilizer

This model uses Immobilizer Generation 4D which is integrated as part of the Comfort Control Module (J393).

[36] - Seat Adjustment (Driver)

  • Label File (3C0-959-760.lbl Label File]

[37] - Navigation

[3D] - Special Functions

[42] - Door Electronics Driver

[44] - Steering Assist

[46] - Comfort System

[47] - Sound System

  • Label File (3C0-035-456.lbl Label File]

[52] - Door Electronics Passenger

[53] - Parking Brake

If you are unsure which Generation is installed, check the Control Module Identification.
EPB3 stands for Generation III and EPB4 for Generation IV. Dealer parts departments may no longer carry the EPB3 modules because they have been superseded with the newer EPB4 modules. The Coding of the replacement modules will likely not be the same as the Coding in the old module but the Coding charts in VCDS should be applicable.

[55] - Headlight Aim Control

[56] - Radio (Analog)

[5D] - Operations

  • Label File (3C0-035-151.LBL)

[62] - Door Electronics Rear Left

[65] - Tire Pressure Monitoring

[69] - Trailer

[6C] - Back-Up Camera

[72] - Door Electronics Rear Right

[76] - Parking Aid

[77] - Telephone