Difference between revisions of "Audi A5/S5 (8T)"
From Ross-Tech Wiki
| (4 intermediate revisions by 2 users not shown) | |||
| Line 27: | Line 27: | ||
=== [03] - [[Audi A5 (8T) Brake Electronics (Bosch 8.0)|Brake Electronics]] === | === [03] - [[Audi A5 (8T) Brake Electronics (Bosch 8.0)|Brake Electronics]] === | ||
Note: ''The Steering Angle Sensor (G85) Calibration is done in address [16] - Steering Wheel Electronics'' | Note: ''The Steering Angle Sensor (G85) Calibration is done in address [16] - Steering Wheel Electronics'' | ||
| − | === [05] - Access/Start Authorization === | + | === [05] - [[MLB based Acc/Start Auth (J393) BCM2|Access/Start Authorization]] === |
=== [06] - Seat Adjustment (Passenger) === | === [06] - Seat Adjustment (Passenger) === | ||
=== [07] - Control Head Front === | === [07] - Control Head Front === | ||
| Line 40: | Line 40: | ||
** Label File ''(8T0-035-7xx-07-H.LBL)'' | ** Label File ''(8T0-035-7xx-07-H.LBL)'' | ||
| − | === [08] - [[Audi A5 (8T) Heating/Air Conditioning|Heating/Air Conditioning]] === | + | === [08] - [[Audi A5 (8T) Heating/Air Conditioning KLIMA 3 ZONEN| Heating/Air Conditioning]] === |
| − | === [09] - [[ | + | === [09] - [[MLB based Cent. Elect. (J519) BCM1|Central Electronics]] === |
* [[Xenon Basic Settings in BCM1/09-Cent. Elect. (J519) controller |Xenon Basic Settings]] | * [[Xenon Basic Settings in BCM1/09-Cent. Elect. (J519) controller |Xenon Basic Settings]] | ||
| Line 64: | Line 64: | ||
* Label File ''(8T0-920-xxx-17.CLB)'' | * Label File ''(8T0-920-xxx-17.CLB)'' | ||
| − | === [19] - [[Audi | + | === [19] - [[Audi CAN Gateway using CAN protocol|CAN Gateway]] === |
Note: ''This model doesn't use an actual 61-Battery Manager. The battery management control module is a slave/subsystem of the CAN Protocol CAN Gateway which requires the use of Long Adaptation under address 19-CAN-Gateway. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.'' | Note: ''This model doesn't use an actual 61-Battery Manager. The battery management control module is a slave/subsystem of the CAN Protocol CAN Gateway which requires the use of Long Adaptation under address 19-CAN-Gateway. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.'' | ||
* [[Battery Replacement]] | * [[Battery Replacement]] | ||
=== [1B] - [[Audi A5 (8T) Active Steering|Active Steering]] === | === [1B] - [[Audi A5 (8T) Active Steering|Active Steering]] === | ||
| − | === [26] - Auto Roof === | + | === [26] - [[Audi A5 Cabriolet (FH) Auto Roof|Auto Roof]] === |
=== [36] - Seat Adjustment (Driver) === | === [36] - Seat Adjustment (Driver) === | ||
=== [37] - [[Audi A5 (8T) Navigation|Navigation]] === | === [37] - [[Audi A5 (8T) Navigation|Navigation]] === | ||
| Line 77: | Line 77: | ||
=== [42] - [[Audi A5 (8T) Door Electronics Driver|Door Electronics Driver]] === | === [42] - [[Audi A5 (8T) Door Electronics Driver|Door Electronics Driver]] === | ||
=== [44] - [[Audi RCEPS Steering Assist|Steering Assist]] === | === [44] - [[Audi RCEPS Steering Assist|Steering Assist]] === | ||
| − | === [46] - Comfort System === | + | === [46] - [[MLB based Central Conv. (J393) BCM2|Comfort System]] === |
| − | === [47] - Sound System === | + | === [47] - [[MLB based Sound System (J525)|Sound System]] === |
=== [52] - Door Electronics Passenger === | === [52] - Door Electronics Passenger === | ||
Latest revision as of 11:17, 28 July 2020
| Audi A5/S5/RS5 (8T/FH/FR) | |
|---|---|
| |
| Source: Ross-Tech, LLC thanks to Roger Labas | |
| Information | |
| Manufacturer: | Audi AG |
| Chassis Code: | 8T/FH/FR |
| Platform: | B8 |
| Model Years: | from 2007 |
| Model Years (US): | from 2008 |
| Predecessor: | None |
| Successor: | None |
| Interface Hardware | |
| HEX-V2, HEX-NET, HEX+CAN | |
| DLC Location | |
|
The DLC is located in the Driver Footwell near Hood Latch. | |
General Information about this Model can be found in the Wikipedia entry.
We have small list of Common Modifications & Tweaks for the B8 (A4/S4/A5/S5/Q5).
[01] - Engine Electronics
Gasoline Engines
Diesel Engines
[02] - Transmission Electronics
[03] - Brake Electronics
Note: The Steering Angle Sensor (G85) Calibration is done in address [16] - Steering Wheel Electronics
[05] - Access/Start Authorization
[06] - Seat Adjustment (Passenger)
[07] - Control Head Front
- Control Head Front (Low)
- Coding
- Adaptation
- Label File (8T0-035-7xx-07-L.LBL)
- Control Head Front (High)
- Coding
- Adaptation
- Label File (8T0-035-7xx-07-H.LBL)
[08] - Heating/Air Conditioning
[09] - Central Electronics
[0E] - Media Player I
[0F] - Radio (Digital)
[14] - Suspension Electronics
[15] - Airbag
Note:Replacement of the Airbag control module may result in Component Protection DTCs such as U1101 and U1100. Component Protection can only be learned/disabled using the Factory Tool in Combination with an online Connection.
[16] - Steering Wheel Electronics
- Coding
- Security Access
- Basic Setting
- Label File (8K0-953-568.LBL)
[17] - Instrument Cluster
- Coding
- Security Access
- Adaptation
- Label File (8T0-920-xxx-17.CLB)
[19] - CAN Gateway
Note: This model doesn't use an actual 61-Battery Manager. The battery management control module is a slave/subsystem of the CAN Protocol CAN Gateway which requires the use of Long Adaptation under address 19-CAN-Gateway. Follow the onscreen instructions to enter the Part Number, Vendor, and Serial Number all as one long new value.
[1B] - Active Steering
[26] - Auto Roof
[36] - Seat Adjustment (Driver)
[42] - Door Electronics Driver
[44] - Steering Assist
[46] - Comfort System
[47] - Sound System
[52] - Door Electronics Passenger
[53] - Parking Brake
- Audi A5 (8T) Parking Brake
- Basic Setting
- Label File (8K0-907-801-V1.LBL)
- Component: Component: EPB Audi B8
- Audi A4 (8R/8K) Parking Brake EPB-4
- Label File (8K0-907-801-V2.LBL)
- Component: EPB-4
[55] - Headlight Aim Control
- Headlight Aim Control Audi (8K) / (8T)
- Label File (8K0-907-357.clb)
- Headlight Regulation Basic
- Coding
- Basic Setting
- 4H0-907-357.clb
- Vehicles with factory installed Xenon headlights that do NOT use a diagnostic capable 55-Headlight Range control module use the link under [09] - Central Electronics instead.
[56] - Radio (Analog)
- Radio System (Generation III)
- Coding
- Adaptation
- Label File
- Radio System (MMI Basic)
- Radio System (MMI High)